Akbar Haidarpour
 Associate Professor
Synthesis of Advanced Materials, MAX Phases
Telephone: +98(81)38411448
Emaxil: a.heidarpour@gmail.com
Address: Shahid Fahmideh.St,Hamedan,IRAN
CV
Website:
Research Interests 
  • Synthesis of Advanced Materials
  • MAX Phases
  • Characterization
Publications
  1. A. Heidarpour*, F. Karimzadeh, M.H. Enayati, "In situ synthesis mechanism of Al2O3–Mo nanocomposite by ball milling process", Journal of Alloys and Compounds, 477 (2009) 692–695.
  2. M. Tavoosi*, F. Karimzadeh, M.H. Enayati, A. Heidarpour, "Bulk Al–Zn/Al2O3 nanocomposite prepared by reactive milling and hot pressing methods", Journal of Alloys and Compounds, 475 (2009) 198–201.
  3. A. Heidarpour*, F. Karimzadeh and M. H. Enayati, Fabrication and characterization of bulk Al2O3/Mo nanocomposite by mechanical milling and sintering, Powder Metallurgy, 54 [4] (2011) 513-517.
  4. A. Heidarpour, A. Shafyei, "Effect of hot rolling process on microstructural and hardness properties of Al-SiC composite" IMMC' 15 International Metallurgy & Materials Congress, 2010, Istanbul, Turkey. 375-379.
  5. A. Heidarpour*, G.M. Choi, M.H. Abbasi, A. Saidi, A novel approach to co-sintering of doped lanthanum chromite interconnect on Ni–YSZ anode substrate for SOFC applications, Journal of Alloys and Compounds, 512 (2012) 156– 159.
  6. A. Heidarpour*, Ali Saidi, Mohamad Hasan Abbasi, The Effects of Milling Methods on Doped LaCrO3 Nanopowder Prepared by Glycine Nitrate Process on Particle Size and Phase Transformation, Advanced Materials Research, 428 (2012) 127-132.
  7. A. Heidarpour*, A.Saidi, M.H.Abbasi, G.M.Choi, In situ fabrication mechanism of a dense Sr and Ca doped lanthanum chromite interconnect on Ni-YSZ anode of a solid oxide fuel cell during co-sintering, Ceramics International, 39(2) (2013) 1821-1826.
  8. A. Heidarpour*, M. H. Abbasi, A. Saidi, G. M. Choi, Synthesis and sintering of Sr- and Ca-doped lanthanum chromite ultrafine powder for SOFC interconnect, Journal of Materials Science, 48(4) (2013) 1401-1406.
  9. M. Mazaheri*, S. Ghasemi, A. Heidarpour, An Approach to Synthesis a New Superconductor Belonging to the YBCO Family: Y2Ba5Cu7Ox, Journal of Superconductivity and Novel Magnetism, 28 (2015) 2637–2640.
  10. A. Fattah-alhosseini*, H. Yazdani Khan, A. Heidarpour, Comparison of anti-corrosive properties between hot alkaline nitrate blackening and hydrothermal blackening routes, Journal of Alloys and Compounds, 676, (2016) 474-480.
  11. N. Shahin, Sh. Kazemi, A. Heidarpour*, Mechanochemical Synthesis Mechanism of Ti3AlC2 MAX Phase from Elemental Powders of Ti, Al and C, Advanced Powder Technology, 27 (2016) 1775–1780.
2017
  1. A. Heidarpour*, N. Shahin, Sh. Kazemi, A novel approach to in situ synthesis of WC-Al2O3 composite by high energy reactive milling, International Journal of Refractory Metals and Hard Materials, 64 (2017) 1–6.
  2.  E. Mohammadi, M. Pourabdoli*, M. Ghobeiti-Hasab, A. Heidarpour, Ammoniacal thiosulfate leaching of refractory oxide gold ore, International Journal of Mineral Processing, 164 (2017) 6-10.
2018
  1. S. Ahmadifard, Sh. Kazemi, A. Heidarpour*, Production and characterization of A5083–Al2O3 –TiO2 hybrid surface nanocomposite by friction stir processing, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(4) (2018) 287-293.
  2. A. Heidarpour*, S. Ahmadifard, Sh. Kazemi, On the Al5083-Al2O3-TiO2 hybrid surface nanocomposite produced by friction stir processing, Protection of Metals and Physical Chemistry of Surfaces, 54(3) (2018) 409-415.
  3. H. Aghamohammadi, A. Heidarpour*, R. Jamshidi, The phase and morphological evolution of Ti3SiC2 MAX phase powder after HF treatment, Ceramics International, 44 (2018)17992-18000.
2019
  1. R. Jamshidi, O. Bayat*, A. Heidarpour, Tribological and corrosion behavior of flame sprayed Al–10 wt% Ti3SiC2 composite coating on carbon steel, Surface & Coatings Technology, 358 (2019) 1–10.
  2. H. Aghamohammadi, A. Heidarpour*, R. Jamshidi, S. Ghasemi, Study on the chemical stability of the synthesized TiCx in Ti-Al-C system after immersion in the HF+H2O2 solution, Advanced Powder Technology, 30 (2019) 393-398.
  3. A. Heidarpour*, H. Aghamohammadi, R. Jamshidi, S. Ghasemi, The shape evolution of TiCx prepared by mechanical alloying of Ti-Al-C system after HF treatment, Ceramics International, 45 (2019) 4653-4660.
  4. A. Heidarpour*, Y. Mazaheri, M. Roknian, S. Ghasemi, Development of Cu-TiO2 surface nanocomposite: Effect of pass number on microstructure, mechanical properties, tribological and corrosion behavior, Journal of Alloys and Compounds, 783 (2019) 886-897.
  5. M.M. Jalilvand, Y. Mazaheri*, A. Heidarpour, M. Roknian, Development of A356/Al2O3+SiO2 surface hybrid nanocomposite by friction stir processing, Surface & Coatings Technology, 360 (2019) 121-132.
  6. H. Aghamohammadi, A. Heidarpour*, R. Jamshidi, O. Bayat, Tribological behavior of epoxy composites filled with nanodiamond and Ti3AlC2-TiC particles: A comparative study, Ceramics International, 45 (2019) 9106-9113.
  7. R. Jamshidi, A. Heidarpour*, H. Aghamohammadi, R. Eslami-Farsani, Improvement in the mechanical and tribological behavior of epoxy matrix with the inclusion of synthesized Ti3AlC2 MAX particles, Journal of Composite Materials, 53(26-27) (2019),3819-3827.
  8. A. Heidarpour*, Fabrication and characterization of A5083–WC-Al2O3 surface composite by friction stir processing, Journal of Materials Engineering and Performance, 28(5) 2019 2747–2753.
  9. S. M. Hoseini, A. Heidarpour*, S. Ghasemi, On the mechanism of mechanochemical synthesis of Ti2SC from Ti/FeS2/C mixture, Advanced Powder Technology, 30(2019) 1672-1677.
  10. Y. Mazaheri*, A. Heidarpour, M.M. Jalilvand, M. Roknian, Effect of friction stir processing on the microhardness, wear and corrosion behavior of Al6061 and Al6061/SiO2 nanocomposites, Journal of Materials Engineering and Performance, 28(8) (2019) 4826-4837.
  11. A. Manochehrian, A. Heidarpour*, Y. Mazaheri, S. Ghasemi, On the surface reinforcing of A356 aluminum alloy by nanolayered Ti3AlC2 MAX phase via friction stir processing, Surface & Coatings Technology, 377 (2019) 124884.
2020
  1. Y. Mazaheri, M.M. Jalilvand, A. Heidarpour, A.R. Jahani, Tribological behaviour of AZ31/ZrO2 surface nanocomposites developed by friction stir processing, Tribology International, 143 (2020) 106062.
  2. S.M. Hosseini, A. Heidarpour, S. Ghasemi, Effects of ball milling sequences on the in situ reactive synthesis of the Ti2SC MAX phase, Advances in Applied Ceramics: Structural, Functional and Bioceramics, 119(4) (2020) 204-211.
  3. M. Bahiraei, Y. Mazaheri, M. Sheikhi, A. Heidarpour, A new approach to synthesis Ti2AlC MAX phase using PVD coating and post-laser treatment, Surface and Coatings Technology, 385 (2020) 125314.
  4. M. Bahiraei, Y. Mazaheri, M. Sheikhi, A. Heidarpour, Mechanism of TiC formation in laser surface treatment of the commercial pure titanium pre-coated by carbon using PVD process, Journal of Alloys and Compounds, 834 (2020) 155080.
  5. H. Aghamohammadi, A. Heidarpour*, S. Ghasemi, Electrochemical synthesis of fluorinated graphene nanoplatelets in electrolytes containing hydrofluoric acid and TiO2 nanoparticles, FlatChem, 22 (2020) 100172.
  6. A. Heidarpour*, H. Aghamohammadi, S. Ghasemi, Structural and morphological characterization of the layered carbide-derived-carbon nanostructures obtained by HF etching of Ti2AlC, Synthetic Metals, 267 (2020) 116478.
  7. R. Jamshidi, O. Bayat*, A. Heidarpour, Effect of Ti3SiC2 content on the corrosion behavior of Al/Ti3SiC2 composite coatings, Materials and Corrosion, 71(12) (2020) 19999-2010.
  8. N. Salimi, O. Bayat*, A. Heidarpour, Investigation of TiO2 Addition on Tribological and Corrosion Behavior of Flame Sprayed Al coating, Physics of Metals and Metallography, 121(14) (2020) 1481–1489..
  9. S. Ghasemi, S. Vaghar, M. Pourzafar, H. Dehghani, A. Heidarpour, A novel predictive model for estimation of cell voltage in electrochemical recovery of copper from brass: Application of gene expression programming, J. Min. Metall. Sect. B Metall. 56 (2020) 237-245.
2021
  1. H. Aghamohammadi, A. Heidarpour*, Morphological evolution of TiC particles with different stoichiometries by hydrofluoric acid etching treatment, Journal of Applied Ceramic Technology, 18(4) (2021) 1192-1204.
  2. A. Heidarpour, Z.S. Mousavi, S. Karimi*, S.M. Hosseini, On the corrosion behavior and microstructural characterization of Al2024 and Al2024/Ti2SC MAX phase surface composite through friction stir processing, Journal of Applied Electrochemistry, 51 (2021) 1123–1136.
  3. Y. Mazaheri*, M. Bahiraei, M. M. Jalilvand, S. Ghasemi, A. Heidarpour, Improving mechanical and tribological performances of the pure copper matrix surface composites reinforced by Ti2AlC MAX phase and MoS2 nanoparticles, Materaisl Chemistry and Physics, 270 (2021) 124790.
  4. A. heidarpour*, H. Aghamohammadi, M. Pourabdoli, A comparative study on the shape evolution of the TiC particles in Ti-C, Ti-Al-C, and Ti-Si-C systems after HF treatment, Protection of metals and physical chemistry of surfaces, 57(6) (2021) 1191-1197.
2022
  1. S. Ghasemia, N. Rafieia and A. Heidarpour, Theoretical Analysis and Experimental Validation of Selective Oxalate Precipitation, Mineral Processing and Extractive Metallurgy (TIMMC), 1311 (1)  (2022) 79–84. doi:10.1080/25726641.2020.1729021
  2. Z.S. Mousavi, S. Karimi, A. Heidarpour*, S.M. Hosseini, S. Ghasemi, Microstructural Variation and Corrosion Behavior of 60/40 Brass/Ti2SC Surface Composite through Friction Stir Processing, Journal of Materials Engineering and Performance, 31 (2022) 3445–3456.
  3. Y. Mazaheri, R. Malmir, M. M. Jalilvand, M. Sheikhi, A. Heidarpour, Mechanical properties and tribological performance of A356/Cr3C2-NiCr surface composite developed by high-velocity oxy-fuel and post friction stir processing treatment, Surfaces and Interfaces, 28 (2022) 101627.
  4. A. Heidarpour, M. Faraji, A. Haghighi, Production and characterization of carbide-derived-nanocarbon structures obtained by HF electrochemical etching of Ti3AlC2
    Ceramics International, 48(8) (2022) 11466-11474.
  5. F. Maleki, S. Ghasemi*, A. Heidarpour, Recycling of Brass Melting Slag through High-Temperature Oxidation- Leaching Process, Sustainable Enviroment Research, 32 (2022) 24.
  6. Y. Mazaheri, E. Khodaveysi, M. Roknian, M. Sheikhi, A. Heidarpour, 75Cr3C2-25NiCr and 86WC-10Co-4Cr High Wear- and Corrosion-Resistant Cermet Coatings Deposited on A356 Substrate by High-Velocity Oxy-Fuel Technique, Coatings 2022, 12, 1408.
  7. A Heidarpour, SM Hosseini, SZ Mousavi, A Akbari , Ti2SC MAX phase enhanced wear characteristics of Al 2024 via friction stir processing, Advances in Materials and Processing Technologies, https://doi.org/10.1080/2374068X.2022.2155759
  8. Nasir Shahin, Akbar Heidarpour, Shahab Kazemi, The purity evolution of Ti3AlC2 MAX phase synthesized by mechanochemical route: The effect of Al content and high‐temperature annealing, https://doi.org/10.1002/eng2.12814.
  •  
Courses Taught
  • kinetics
  • Thermodynamics
  • Pyrometallurgy
  • Advanced Analysis
Academic Experiences
​​​​​​​
Honors and Awards