Mehdi Pourabdoli
 Associate  Professor
This is a custom template that renders the abstract view of the assets that appear in the Asset Publisher.
Telephone: +98(81)38411445
Email: mpourabdoli@hut.ac.ir
Address: Shahid Fahmideh.St,Hamedan,IRAN
CV
Website:
Research Interests 
  • Extractive Metallurgy
  • Synthesis of Advanced Materials
  • Electrical Conductive Materials and Adhesives
  • Hydrogen Storage Materials
  • Core-Shell Particles
  • Thermodynamics and Kinetics
  • Magnetic Alloys
Publications
  • ​​​​​​​
    Journal Papers
    [1] T. Kazemizadeh, M. Pourabdoli, Synthesis of porous Si-C composite powder from activated raw materials, Ceramic International, Vol 48, 2022.
    [2] S. Z. Mousavi, M. Pourabdoli, Physical and chemical properties of Ag-Cu composite electrical contacts prepared by cold-press and sintering of silver-coated copper powder, Materials Chemistry and physics, Vol 290, 2022.
    [3] S. Z. Mousavi, M. Pourabdoli, Silver-coated copper particles as a new raw material for manufacturing electrical contacts, Microelectronics Reliability, Vol 134, 2022.
    [4] S. Vaghar, S. Ghasemi, M. Pourabdoli, Anodic dissolution of waste brass chips in sulfuric acid for the recovery of copper and zinc, Int J of Environmental Science and Technology, Vol 19, 2022.
    [5] M. Gharabaghi, A. Azadmehr, S. Aghazadeh, M. Pourabdoli, Clean Practical Method for Cadmium Recycling from Toxic Material and Optimization of Recycling Process, Journal of Metals (JOM), Vol 74, 2022.
    [6] R. Avand, A. Ghaderi, M. Pourabdoli, Feasibility of Production of an Iron-Base Metal Matrix Composite by Infiltration of Molten Gray Cast Iron into a 304 Stainless Steel Porous Skeleton, J of Science and Technology of Composites, Vol 8, 2022.
    [7] M. Ebrahimi, A. Ghaderi, M. Pourabdoli, Utilization of Na2CO3 for Intermediate Phase Formation in Vanadium-Zircon Pigment Synthesis, Materials Chemistry and physics, Vol 281, 2022.
    [8] Z. Sahebi, M. Pourabdoli, V. A. Lashgari, M. H. Doost Mohammadi, Effect of time, temperature and composition on the performance of conductive adhesives made of silver-coated copper powder, Int J of Adhesion and Adhesives, Vol 114, 2022.
    [9] Z. Hosseini, S. Mollazadeh, J. V. Khaki, M. Pourabdoli , Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction,  Int J of Engineering:  Transactions A, Vol 35, 2022.
    [10] A. Heidarpour, H. Aghamohammadi, M. Pourabdoli, A Comparative Study on the Shape Evolution of the TiC Particles in Ti–C, Ti–Al–C, and Ti–Si–C Systems after HF Treatment, Protection of Metals and Physical Chemistry of Surfaces, Vol 57, 2021.
    [11] Z. Sahebi, M.H.D. Mohammadi, V.A. Lashgari, M. Pourabdoli, Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents, Int J of Engineering: Transactions B, Vol 34, 2021.
    [12] Z. Sahebi, V. A. Lashgari, M.H.D. Mohammadi, D. Uner, M. Pourabdoli Microstructure, resistivity, and shear strength of electrically conductive adhesives made of silver-coated copper powder, Microelectronics Reliability, Vol 127, 2021.
    [13] M. Harwarth, M. Brauer, Q. Huang, M. Pourabdoli, J. Mola, Influence of Carbon on the Microstructure Evolution and Hardness of Fe–13Cr–xC (x = 0–0.7 wt.%) Stainless Steel, Materials, Vol 14, 2021.
    [14] M. Delavari, M. Pourabdoli, H. Hosseini, Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Enaznergy Storage Capacity, J of Science and Technology of Composites, Vol 7, 2020.

    [15] N. Nazeri, Sh. Raygan, M. Pourabdoli, Effect of TiO2 on Hydrogen Desorption Properties of Al3Mg2, Metallurgical Engineering, Vol 22, 2020.

    [16] E. Mohammadi , M. Pourabdoli , Effect of mechanical activation on the kinetics of ammoniacal thiosulfate leaching of a refractory oxide gold ore, Iranian Journal of Materials Science and Engineering, Vol 16, 2019.
    [17] A. Hasanvand, M. Pourabdol , A. Ghaderi , Thermochemical heat storage properties of mechanical activated Co3O4-5wt.% Al2O3 and Co3O4-5wt.% Y2O3 composite powders, Iranian Journal of Materials Science and Engineering, Vol 15, 2019.
    [18] A. Hasanvand, M. Pourabdoli, Theoretical thermodynamics and practical kinetics studies of oxygen desorption from Co3O4-5 wt. % Al2O3 and Co3O4-5 wt. % Y2O3 composites, J of Particle Science & Technology, Vol 5, 2019.
    [19] N. Nekokar, M. Pourabdoli, Isothermal Redox Kinetics of Co3O4-Fe2O3 Nano-Composite as a Thermochemical Heat Storage Material, Int J of Engineering Transactions: B, Vol 32, 2019.
    [20] A. Hasanvand, M. Pourabdoli, A. Ghaderi, Thermochemical Heat Storage Properties of Co3O4-X wt. % Al2O3 and Co3O4-X wt. % Y2O3 Composites (X=1, 2, 5, 8, 10), J of Renewable Energy and Environment, Vol 6, 2019.

    [21] M. Delavari, M. Pourabdoli, A. Ghaderi, Comparison of Preparation Methods of Co3O4-Fe2O3 Composite Powder as a Heat Storage Material and Study of its Morphological and Phase Evolution during Redox Reactions, Metallurgical Engineering, Vol 22, 2019.

    [22] Z. Jarrahi, Sh. Raygan, M. Pourabdoli, The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling, J of Advanced Materials in Engineering, Vol 37, 2019.
    [23] M. Rahmani, Sh. Raygan, H. Abdizadeh, M. Pourabdoli, S. Mirgaderi, Properties of activated MgH2 +mischmetal nanostructured composite produced by ball milling, Materials for Renewable and Sustainable Energy, Vol 15, 2018.
    [24] N. Nekokar, M. Pourabdoli, A. Ghaderi, Effects of Fe2O3 addition and mechanical activation on thermochemical heat storage properties of the Co3O4/CoO system, J of Particle Science & Technology, Vol 4, 2018.
    [25] N. Nekokar, M. Pourabdoli, A.Ghaderi Hamidi, D. Uner, Effect of mechanical activation on thermal energy storage of Co3O4/CoO system, Advanced Powder Technology, Vol 29, 2018.
    [26] H. Nourbaghaee, A.Ghaderi Hamidi, M. Pourabdoli, Direct recovery of boiler residue by combustion synthesis, Waste Management, Vol 74, 2018.

    [27] F. Mehri, S. Raygan, M. Pourabdoli, Effect of Milling and Heat Treatment on the Microstructure of 38wt%TiO2-36wt%NiO-26wt%C and the Influence of Produced Nanostructured Powder Mixtures on the Hydrogen Desorption from MgH2, Metallurgical and Materials Engineering, Vol 30, 2018.

    [28] S. Mohammadi, M. Pourabdoli, M. Ghobeiti, A. Heidarpour Ammoniacal thiosulfate leaching of refractory oxide gold ore, Int J Mineral Processing, Vol 164, 2017.

    [29] Z. Jarrahi, Sh. Raygan, M. Pourabdoli, Synthesis of Boron Containing Cu-12Al-4Ni Memory Alloy powder by Using Mechanical Alloying Method and Investigating the Changes of the Density and Porosity in Bulk Samples During production, Metallurgical Engineering, Vol 20, 2017.
    [30] F. Mehri, S. Raygan, M. Pourabdoli, Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2- 36NiO-26C) Nano-Composite Prepared by Mechanical Milling, Advanced Materials and Technologies (JAMT), Vol 6, 2017.

    [31]  L. Chitsaz, Sh. Raygan, M. Pourabdoli, Effect of Synthesized MgNi4Y Catalyst on Hydrogen Desorption Properties of Milled MgH2, Metallurgical and Materials Transactions E, Vol. 2E, 2015.
    [32] F. Hosseini, M.  Pourabdoli, D. Uner, Sh. Raygan, Effect of process control agents on synthesizing nano-structured 2Mg–9Ni–Y catalyst by mechanical milling and its catalytic effect on desorption capacity of MgH2, Advanced Powder Technology, Vol 26, 2015.
    [33]  M. Pourabdoli, S. Raygan, H. Abdizadeh, D. Uner, A comparative study for synthesis methods of nano­structured (9Ni-2Mg-Y) alloy catalysts and effect of the produced alloy on hydrogen desorption properties of MgH2, Int J Hydrogen Energy, Vol. 38, 2013.
    [34] M. Pourabdoli, S. Raygan, H. Abdizadeh, D. Uner,  Determination of kinetic parameters and hydrogen desorption characteristics of MgH2-10 wt% (9Ni-2Mg-Y) nano-composite, Int J Hydrogen Energy, Vol. 38, 2013.
    [35] L. Chitsaz, Sh. Raygan, M. Pourabdoli, Mechanical milling of Mg, Ni and Y powder mixture and investigating the effects of produced nanostructured MgNi4Y on hydrogen desorption properties of MgH2, Int J Hydrogen Energy, Vol. 38, 2013.
    [36] S. Raygan, M. Pourabdoli, H. Abdizadeh, M. Medraj; Synthesizing Nanostructured Ni75Mg16.66Y8.34 (at. %) Powder by Solid State Reaction and Mechanical Milling, Materials and Manufacturing Processes, Vol. 27, 2012.
    [37]  H. Ehsanian Mofrad , Sh. Raygan , M. Pourabdoli , F.K.Ahadi, Effect of rolling and annealing processes on the hardness and electrical conductivity of Cu-13.5%Mn-4%Ni alloy, J of Materials Processing Technology, Volume 211, Issue 11, 2011.
    [38] A. Movahedian, Sh. Raygan, M. Pourabdoli, The chlorination kinetics of zirconium dioxide mixed with carbon black, Thermochimica Acta,  Vol. 512, 2011.
    [39] S. Raygan, A. Dabbagh , H. Abdizadeh, M. Pourabdoli, Influence of Bentonite and Talk Additives on the Cold Strength and Reducibility of Sinters for Blast Furnace, Ironmaking & Steelmaking, Vol. 36, No.4, 2009.
    [40] K. Pazand, M. S. Panahi, M. Pourabdoli, Simulating the Mechanical Behavior of a Rotary Cement Kiln Using Artificial Neural Networks, Materials & Design, Volume 30, Issue 9, 2009.
    [41] A. Jazayeri, J. Mola, M. Rezaei, M. Pourabdoli, Investigation into Key Parameters in Melt Spinning Process of Ni44Co38Fe8Si8B2 Alloy, J of Sharif University of Technology, Vol.47, 2008. 
    [42]  M. Rezaei, A. Jazayeri G., J. Mola, M. Pourabdoli; The Structure and Magnetic Properties of Rapidly CoFeSiB Alloy, J of Iran University of Science & Technology, Vol. 19, Issue 5, 2008.
    [43] M. Pourabdoli, Sh. Raygan, H. Abdizadeh, K. Hanaei, New Process for Production of Ferrotitanium from Titania Slag, Canadian Metallurgical Quarterly , Vol.46, No. 1, 2007.
    [44] M. Pourabdoli, Sh. Raygan, H. Abdizadeh, K. Hanaei,"Production of High Titania Slag from Ilmenite Concentrate by Electro Slag Crucible Melting (ESCM) Process", Int J of Mineral Processing, Vol.78, 2006.
    [45] M. Pourabdoli, Sh. Raygan, H. Abdizadeh, K. Hanaei, Smelting of Iranian Ilmenite by Electro Slag Crucible Melting Process, Rare Metal Materials and Engineering, 2006.
    [47] M. Pourabdoli, Sh. Raygan, H. Abdizadeh, K. Hanaei, Smelting Reduction of Ilmenite Concentrate from Kahnouj Mine, Metallurgical Engineering, Vol. 41, 2004.


    Conference Papers
    [1] M. Pourabdoli et al., Characterization of Silver-Coated Copper Particles Made of Activated Copper Powder, The 10th International Conference on Materials and Metallurgical Engineering (imat 2021), 2021, Tehran, Iran.
    [2] O. Heidari, M. Pourabdoli, M.H. Doost Mohammadi, Studying of the Anisotropic Electrical Conductive Adhesives Made of Various Fillers, The 10th International Conference on Materials and Metallurgical Engineering (imat 2021), 2021, Tehran, Iran.
    [3] Z. Hosseini, M. Pourabdoli, A. Ghaderi, Studying the Carbothermic Reduction of Titanomagnentite Concentrate, The 10th International Conference on Materials and Metallurgical Engineering (imat 2021), 2021, Tehran, Iran.
    [4] Z. Mousavi, M. Pourabdoli, Studying of Manufacturing Parameters on the Electrical and Microstructure Properties of the Electrical Conductive Made of Silver-Coated Copper Powder, The 3rd National Conference on Materials Engineering, 2020, Malayer.
    [5] Z. Sahebi, M. Pourabdoli, M.H. Dost Mohammadi, Studying of the Composition and Morphology of Silver-Coated Copper Powder on the Microstructure and Electrical Resistance of Conductive Adhesives, The 8th International Conference on Materials and Metallurgical Engineering (imat 2019), 2019, Tehran, Iran.
    [6] M. Ebrahimi, A. Ghaderi, M. Pourabdoli, Utilization of Sodium Carbonate in Intermediate Product for Synthesizing of the Zircon-Based Blue Pigments, The 7th International Conference on Materials and Metallurgical Engineering (imat 2018), 2018, Tehran, Iran.
    [7] R. Avand. A. Ghaderi, M. Pourabdoli, Production of an Iron-Base Metal Matrix Composite Reinforced with Chromium Carbide by Infilteration of Molten Phase, The 7th International Conference on Materials and Metallurgical Engineering (imat 2018), 2018, Tehran, IRAN.
    [8] A. Hasanvand, M. Pourabdoli, A. Ghaderi, Effect of Mechanical Activation on the Thermochemical Heat Storage Properties of Co3O4-5wt.% Al2O3 and Co3O4-5wt.% Y2O3 composite powders, The 6th International Conference on Materials and Metallurgical Engineering (imat 2017), 2017, Tehran, Iran.
    [9] H. Nourbaghaei, A. Ghaderi, M. Pourabdoli, Studying of Effective Parameters on the FeV Synthesizing by Aluminothermic Process, The 5th International Conference on Materials and Metallurgical Engineering (imat 2016), 2016, Tehran, Iran.
    [10] N. Nekokar, M. Pourabdoli, A. Ghaderi, Effect of mechanical activation on the REDOX Processes of Co3O4-Fe2O3 system for Thermochemical Heat Storage, The 5th  International Conference on Materials and Metallurgical Engineering (imat 2016), 2016, Tehran, Iran.
    [11] M. Pourabdoli, Sh. Raygan, H. Abdizadeh, D. Uner, Hydrogen Desorption Characteristics of Nano-structured  MgH2-10 wt. % Mg2Ni9Y Prepared by Ball Milling, K-J Ceramics 29 / November 21-24, 2012, Daegu, South Korea.
    [12] S. Raygan; M. Pourabdoli; H. Abdizadeh, M. Medraj, Synthesis of Nanostructured Ni75Mg16.66Y8.34 (at %) Powder by Solid State Reaction and Mechanical Milling, VII International Conference on Mechanochemistry and Mechanical Alloying, August 31-September 3, 2011, Herceg Novi, Serbia.
    [13] M. Pourabdoli, S. Raygan, H. Abdizadeh, K. Hanaei, Smelting of Iranian Ilmenite by Electro Slag Crucible Melting Process, 2005’ Xi’an International Titanium Conference, 2005, Xian, China.
     
Courses Taught
  • Extraction of Rare Metals (MSc)
  • Pyrometallurgy Processes (MSc)
  • Hydrometallurgy and Electrometallurgy Processes (MSc)
  • Renewable Energies and Energy Storage Materials (MSc)
  • Feasibility Studies on Metals Production (MSc)
  • Ferroalloys Production and Consumption (MSc and BSc)
  • Error in Measurements (MSc)
  • Steel Making (BSc)
  • Refractory Materials (BSc)
  • Advanced Materials (BSc)
  • Iron and Steel Making (BSc)
Academic Experiences
  • 2022-Present: Faculty member (Associate Professor), Department of Materials Eng., Hamedan University of Technology, Hamedan, Iran.
  • 2013-2022: Faculty member (Assistance Professor), Department of  Materials Eng., Hamedan University of Technology, Hamedan, Iran.
  • 2008 - 2013: PhD in Materials Science and Engineering, School of Metallurgy and Materials Eng., University of Tehran, Tehran, Iran.
  • 2002 - 2005: MSc in Materials Science and Engineering, School of Metallurgy and Materials Eng., University of Tehran, Tehran, Iran.
  • 1998 – 2002:  BSc in Materials Science and Engineering, Materials Engineering Faculty, Sahand University of Technology, Tabriz, Iran.
Honors and Awards
  • Superior Technologist of Hamedan Province, 2023 
  • Top researcher of Materials Engineering Department, Hamedan University of Technology, 2023
  • The best teacher of Materials Engineering Department, Hamedan University of Technology, 2020
  • The best teacher of Materials Engineering Department, Hamedan University of Technology, 2018
  • Top researcher of Materials Engineering Department, Hamedan University of Technology, 2022
  • Top researcher oof Materials Engineering Department, Hamedan University of Technology, 2019
  • 2nd rank (among 60 applicants) in the PhD entrance exam of University of Tehran, 2008
  • 3rd rank in Kharazmi International Festival, Tehran, 2007
  • 2nd rank in the national festival of Iranian Mines and Metals Ministry among 500 researchers, 2007