- Localized mechanical testing methods: shear punch test, miniature tensile test, nanoindentation test
- Metal Forming Processes and their FEM analysis (Extrusion, Severe Plastic Deformation (SPD) Processes, Superplastic Forming)
- Superplasticity,
- Mechanical Behavior of Materials.
- Light weight alloys, Aluminum and Magnesium alloys
- S. Karimi, N. Fakhar, M. Faraji, F. Fereshteh-Saniee, Simultaneous improvement of mechanical strength and corrosion resistance in aluminum alloy 5083 via severe plastic deformation, Materials Chemistry and Physics, 313, 128755, 2024.
- Q. Wang, S. Liang, F. Yuan, B. Liu, J. Yu, W. Wang, N. Fakhar, & H. Li, A high-performance degradable Mg alloy suturing staple for single-arm oral stapling robot. Journal of Magnesium and Alloys. 2023, In press https://doi.org/10.1016/j.jma.2023.06.009
- N. Fakhar, E. Khademi, M. Sabbaghian, A. Momeni, F. Fereshteh Saniee, P. Nagy, A. Szabo, J. Gubicza, Microstructure and Hot Shear Deformation Behavior of a Fine-grained AA5083 Aluminum Alloy, Materials Chemistry and Physics, 294, 126976, 2023.
- B. Tolaminezhad, N. Fakhar, Development of microstructure homogeneity and mechanical properties after ECA-extrusion of copper alloy C11000, Transactions of the Indian Institute of Metals, 76 (1), 259-267, 2023.
- N. Fakhar, M. Sabbaghian, Hot shear deformation constitutive analysis of fine-grained ZK60 Mg alloy sheet fabricated via DECLE and sheet extrusion, Transactions of Nonferrous Metals Society of China, 32 (8), 2541-2556, 2022.
- M. Sabbaghian, N. Fakhar, P. Nagy, K. Fekete, J. Gubicza, Investigation of shear and tensile mechanical properties of ZK60 Mg alloy sheet processed by rolling and sheet extrusion, Materials Science and Engineering A, 828, 142098, 2021.
- F. Akbaripanah, M. Sabbaghian, N. Fakhar, J. Gubicza, J. Eckert, Influence of high-pressure torsion on microstructure evolution and mechanical properties of AZ80/SiC magnesium matrix composites, Materials Science and Engineering A, 826, 141916, 2021.
- N. Fakhar, M. Sabbaghian, P. Nagy, K. Fekete, J. Gubicza, Superior low-temperature superplasticity in fine-grained ZK60 Mg alloy sheet produced by a combination of repeated upsetting process and sheet extrusion, Materials Science and Engineering A, 819, 141444, 2021.
- N. Fakhar, M. Sabbaghian, A good combination of ductility, strength, and corrosion resistance of fine-grained ZK60 magnesium alloy produced by repeated upsetting process for biodegradable applications, Journal of Alloys and Compounds, 862, 158334, 2021.
- N. Fakhar, E. Khademi, M. Momeni, High temperature behavior of severely deformed AA 5083 through equal channel lateral extrusion, Materials Chemistry and Physics, 243, 122581,2020.
- F. Fereshteh-Saniee, N. Fakhar, R. Mahmudi, Influence of combined severe plastic deformation and sheet extrusion process on superplastic formability of AA 5083 aluminum alloy assessed by free bulge test, Journal of Materials Engineering and Performances, 28(11), 6682-6691, 2019.
- Faramarz Fereshteh-Saniee, Naeimeh Fakhar, Mohammad Asgari, Reza Mahmudi: A new experimental-numerical approach for studying the effects of gas pressure profile on superplastic forming characteristics of Al-Mg5.6 alloy. International Journal of Advanced Manufacturing Technology, 71, 1771-1780, 2017.
- N. Fakhar, F. Fereshteh-Saniee, R. Mahmudi, Significant improvements in mechanical properties of AA 5083 aluminum alloy using dual equal channel lateral extrusion, Transactions of nonferrous metals society of China, 26, 3081-3090, 2016.
- F. Fereshteh-Saniee, N. Fakhar. F. Karami, R. Mahmudi, Superior ductility and strength enhancement of ZK60 magnesium sheets processed by a combination of repeated upsetting and forward extrusion, Materials Science and Engineering A, 673, 450-457, 2016.
- F. Fereshteh-Saniee, M. Asgari, N. Fakhar, Specialized mechanical properties of pure aluminum by using non-equal channel angular pressing for developing its electrical applications, Applied Physics A, 122, 779-792, 2016.
- N. Fakhar, F. Fereshteh-Saniee, R. Mahmudi, High strain-rate superplasticity of fine- and ultrafine-grained AA5083 aluminum alloy at intermediate temperatures, Materials & Design, 85, 342-348, 2015.
- F. Fereshteh-Saniee, N. Fakhar, M. Karimi, Experimental, Analytical and numerical studies on the forward extrusion process, Materials and Manufacturing Processes, 28(3), 265-270, 2013.
- M. Karimi, F.F. Saniee, N. Fakhar, Experimental and Numerical Parameter Studies on Plane-Strain Backward Extrusion, Steel Research International, 81, 430-433, 2010.
Conferences:
- N. Fakhar, M. Khoshghadam, Finite element analysis of cell geometry in scaffolds for bone implant applications, 20th national and 9th International Conference of Manufacturing Engineering, Tehran, Iran, 2024.
- N. Fakhar, M. Sabbaghian, Effect of dual equal channel lateral extrusion on the shear mechanical properties and corrosion resistance of ZK60 alloy, 12th International conference on materials science and metallurgical engineering, Tehran, Iran, 2023.
- A. Momeni, N. Fakhar, S. Chegeni, Investigation of compression response of a DECLE processed sample, 11th International conference on materials science and metallurgical engineering, Tehran, Iran, 2022.
- N. Fakhar, F. Joulaei, Parametric study of a new extrusion process using finite element simulation, 9th International conference on materials science and metallurgical engineering, Tehran, Iran, 2020.
- N. Fakhar, Z. Mokhtari, M. Rezaee, Investigation of a new route for dual equal channel lateral extrusion process to increase the homogeneity of AZ80 magnesium alloy, 15th annual and 4th international Conference on Manufacturing Engineering. Tehran, Iran, 2018
- Faramarz Fereshteh-Saniee, Naeimeh Fakhar, "Numerical and Experimental study of the effects of die profile on the required extrusion load in the plane strain forward extrusion. 19th Iranian Conference on Mechanical Engineering. Birjand, Iran, 2011
- Mechanical Behavior of Materials, (for M.Sc students)
- Materials and processes in manufacturing
- Engineering Mechanics: Statics
- Mechanics of Materials
- Machine Design Elements
- English for mechanical engineering
- Numerical Analysis
- CAD Softwares: AutoCAD, SolidWorks, Mechanical Desktop
- Finite Element Softwares: Abaqus, Ansys, Ls-Dyna, Deform
- MATLAB
- Minitab
- Awarded German research foundation (DFG) scholarship, 2022
- Title: Dynamic strain aging (DSA) of severely deformed Al–Mg alloys
- Awarded Iran national science foundation scholarship, 2016
- Title: Superplastic forming of magnesium and aluminium alloys
- Best researcher at the Mechanical Engineering Department, Hamedan University of Technology, Research week, Dec 2023, Dec, 2022, Dec 2021.
- Best Lecturer at the Mechanical Engineering Department, Hamedan University of Technology, Education week, May 2023, May, 2022.
- Ranked 2nd among about 22 mechanical engineering students graduated from Bu-Ali Sina university for MSc Program, 2009
- Ranked 3rd among about 40 mechanical engineering students graduated from Bu-Ali Sina university for B.Sc. Program, 2006
Address: Shahid Fahmideh.St,Hamedan,IRAN
Telephone:+98(81)38411000
Email: info@hut.ac.ir
